beautypg.com

Introduction, Standard features, Specifications – Code 3 LED Hide-A-Blast User Manual

Page 2

background image

Introduction

The HB Series LED light represents the latest in state-of-the-art LED warning technology. The latest in

MOSFET technology and advanced design provide efficient operation, superior performance, reliability and

long life. The use of microprocessor control allows the HB Series to offer more light pattern options and

versatility than any other remote system available. The user may select Quad, Triple, Double, Single, Active

Flash, Variable Flash, Double-Double or Triple Flash Patterns.

Standard Features

The HB Series HIdE-A-BLAST LEd light is available in a single unit package complete with

installation instructions, mounting hardware and gasket. Multiple HB Series LEd Lights can be

connected together and operated from the same control switch. All HB Series LEd Lights have the

following features:

12 ANd 24 VdC OPERATION

REVERSE POLARITY PROTECTEd

MULTIPLE USER SELECTABLE FLASH PATTERNS

See Flash Pattern Selection, page 6.

Note: A user supplied fuse must be installed in series with the red wire. Install the fuse near the

power source. The fuse should be sized to the nearest standard size fuse that is approximately

125% of the combined total current of all HB Series LEd Lights installed on the circuit. As

an example, two HB Series LEd Lights should be fused at 3A for 12VdC operation, 1A for 24V

operation.

Specifications

MODEL VARIANTS:

HB615X = 3 rows having 2 LEDs in each row (6 total LEDs)

HB915X = 3 rows having 3 LEDs in each row (9 total LEDs)

X denotes the LED color, Red, Blue, Amber or White (R, B, A or W).

HB615W is has six white LEDs.

MECHANICAL SPECIFICATIONS:

CABLE LENGTH: 15 feet

DIMENSIONS: See figure A

BOXED WEIGHT: 0.9lb

UNBOXED WEIGHT: 0.8lb

LED COLOR: Red, Blue, Amber or White (mixing of colors in the same unit is not supported)

LENS COLOR: clear

ELECTRICAL SPECIFICATIONS:

OPERATING VOLTAGE & POLARITY: 11-30VDC, Neg or Pos ground

AVERAGE CURRENT: 0.6A @ 13.8VDC

OPERATING TEMPERATURE: -30 to 150 F

INPUT POWER: 8W

OPERATING MODES: Synchronous and Non-Synchronous