Code 3 Hide-A-Way - Manual (Page 6)

Options
The Hide-A-Way Strobe product group includes the following models:
Single Products
HSTCL Clear strobe tube assembly and this manual
HSTCX 2 Red, Blue, Amber or Green strobe tube assembly and this manual
HIDCL Contains one HSTCL and a 15 foot cable. 1
HIDCX Contains one HSTCX and a 15 foot cable.
1 - Optional 20 or 25 foot cable is also available.
2 - Specify desired strobe tube color (R,B,A,G) when ordering replacement colored strobe tube assem-
blies.
Maintenance
Strobe Tube Assembly Replacement
1.Turn off power to the strobe power supply and allow the strobe tube assembly to cool for 10 minutes.
2. Disconnect the strobe tube assembly from the cable.
3. If necessary, remove the reflector assembly that houses the faulty tube.
4. Remove the strobe tube assembly from the reflector assembly, being careful not to strip threads in the reflec-
tor, and ensuring that all of the gasket material is removed as well.
5. Insert the strobe tube assembly into the reflector, see steps 3 & 4, page 3. Reinstall the reflector assembly.
6. Test the strobe tube by connecting the strobe tube assembly to the cable. Switch the power supply on. After
verifying the tube is good, turn off the power supply.
High voltages and /or temperatures are present inside the unit. Disconnect from power and wait 10
minutes prior to servicing or troubleshooting. Use hand and eye protection when changing halogen
lamps or flashtubes as they are pressurized and accidental breakage can result in flying glass.
WARNING!
!
6