CellarPro AIR HANDLER 6500 HORIZONTAL, 7090 - Manual (Page 31)

31
Remote Control / Display Instructions
Digital
Display The temperature displayed on the control is red instead of blue.
Quick Chill
Button
Button
Icon
To activate the “Quick Chill” mode, press the “Up” button for three
seconds
To deactivate “Quick Chill”, press the “Up” button for three seconds
again
The “Quick Chill” indicator (Row 3) light will turn on when the cooling
unit is in “Quick Chill” mode,
In the “Quick Chill” mode, the cooling unit will run continuously for 6
hours (or until the unit reaches set point.). This mode is useful after
loading “warm” bottles in the cabinet.
Auto
Defrost
Mode The cooling unit has a factory default defrost cycle that initiates every
16 hours for 20 minutes. When the cooling unit is in auto-defrost
mode, the “Defrost” Indicator light (Top row) will turn on, and the
evaporator fan will run.
Manual
Defrost Hold the defrost button in for 3 seconds to initiate a manual defrost.
The “Defrost” Indicator light (Top row) will turn on for a 20 minute
defrost cycle.
Light The light button function is disabled, however pressing it will turn
on/off the light indicator on the display (2nd row).
Energy
Saver The remote display is not configured with an Energy Saver mode. The
set point can be raised manually for periods where energy savings is
desired.