Catler SB 4010 User Manual

Page 6

CATLER RECOMMENDS SAFETY FIRST

• When processing dry, thick or heavy

mixtures, interrupt the process after 30
seconds. Stir the ingredients and allow the
motor to rest for 1 minute at least.

• Recipes in the manual are considered as

common food amount in household.

• If food becomes lodged around the

processing blade, turn off the appliance
by releasing the main switch and
disconnect the power cord from the
power outlet. Use a spatula, or plastic
knife, to dislodge the food. In no cases
use your fi ngers to dislodge the food. The
blades are very sharp.

• Do not insert your hand into the mixing

bowl if the appliance is in process.

• Do not remove the appliance from the

mixing mixture during operation. Turn
off the appliance at fi rst, disconnect the
power cord from the power outlet and
wait until the blades stop turning. Then
you can revome the appliance from the
mixing mixture.

• Do not leave the appliance unattended

when in use.

• Do not use the appliance with wet hands.
• Always ensure the appliance has been

turn off before attempting to move the

appliance, when the appliance is not in
use and before cleaning and storing. Then
you can unplug the appliance from the
power outlet.

• If you do not use the appliance for a

long time or you attempt to leave it
unattended, unplug the appliance from
the power outlet.

• Do not disconnect the appliance from the

power point by pulling the electric cable
– it may damage the electric cable/power
point. Disconnect the cable from the
power point by gently pulling the plug of
the electric cable.

• The appliance is not intended for use by

young children or infi rm persons unless
they have been adequately supervised by
a responsible person to ensure they can
use the appliance safely.

• Use only supplied accessories or

recommended accessories by a
manufacturer. Otherwise it may result in
fi re, electric shock or injury to persons.

• Keep the appliance clean. Follow the

cleaning instructions provided in Care and
Cleaning chapter.

TO PROTECT AGAINST ELECTRIC SHOCK DO NOT IMMERSE THE MOTOR
BODY, POWER CORD OR POWER PLUD IN WATER OR ANY OTHER LIQUID
OR DO NOT ALLOW MOISTURE TO COME IN CONTACT WITH THESE PARTS.
DO NOT WASH THE POWER BASE UNDER RUNNING WATER.

CAUTION: HOUSEHOLD USE ONLY. READ INSTRUCTIONS BEFORE USE. DO
NOT IMMERSE IN ANY LIQUID.