beautypg.com

Catler SB 4010 User Manual

Page 12

background image

10

OPERATING YOUR CONTROL GRIP SB 4010

Tips for using the stick mixer
• The stick mixer blends foods and liquids

rapidly and eff ectively, therefore it is
easy to over-process. Stop the stick mixer
regularly and check food throughout the
operation.

• Always allow food to cool down before

blending.

• The stainless steel blending attachment

allows to process food directly in the
saucepan. This makes blending soups and
sauses very easy to prepare.

• For safety reasons remove saucepan away

from the heat before processing.

• Ensure the power cord and the body are

kept away from any heat source.

• Cut food for processing into uniform sizes.

This will ensure smooth and consistent
results.

• Heat up the liquids you add to warm

blended soups or sauces. This will ensure
even blending.

• Place the blending jug on the anti-slap

mat during blending. This will keep the
jug stable and you can process food more
comfortably.

• Do not operate the appliance

continuously for more than 1 minute.
After 1 minute, turn off the appliance and
allow resting for 1 minute.

If food becomes lodged around the
processing blade, follow these instructions.
1. Release the main switch and wait until

the processing blade stops turning.
Disconnect the power plug from the
power outlet.

2. Use a spatula to carefully dislodge the

food. In no case use your fi ngers to clean
the blade. Attention! The blade is very
sharp.

3. After the food has been removed and

blade is clean, plug the power plug
into the power outlet and continue in
blending.

CHOPPER
Assembling the chopper
1. Before assembling the chopper ensure

that all parts (chopper bowl, chopping
blade and chopper bowl lid with gear) are
clean and dry not to damage the motor
unit by running water left inside after
cleaning, mainly from the chopper bowl
lid.

2. Place the chopping blade on the metal

pivot pin in the base of the chopper
bowl. You should hear a click sound when
placing the chopping blade. Ensure the
blade is properly and fi rmly placed.

3. Place the food you wish to chop inside

the chopping bowl. Do not exceed the
maximum MAX (750 ml) marking.