Catler SB 4010 - Manual (Page 10)

8
OPERATING YOUR CONTROL GRIP SB 4010
OPERATING YOUR CONTROL GRIP SB 4010
BEFORE FIRST USE
Before fi rst use, remove and safely discard all
promotional lables and packaging materials
attached to the device.
Wash the following accessories in warm
soapy water with:
• detachable blending attachement;
• chopper bowl lid with gear;
• chopper
bowl;
• chopping blade;
• lid / anti-slip mat;
• blending
jug;
• gear box; and
• whisk.
Rinse and dry thoroughly. Ensure no water
remains inside any accessory and these are dry
thoroughly to avoid water running into the
motor body when attached.
It is important you wash all parts which come
in touch with food in warm soapy water.
NOTE
Other parts of the appliance wipy by a soft
cloth, gently soaked in lukewarm water and dry
thoroughly.
Detachable blending attachment, chopper
bowl, blending jug, whisk and lid / anti-slip mat
can be washed in the dishwasher.
NOTE
Motor unit is a versatile appliance that can be
attached to:
• detachable blending attachment – for use
as a stick mixer;
• chopper bowl with lid and chopping
blade – for use as a chopper;
• whisk with gear box – for use as a hand
whisk.
STICK MIXER
Assambling the stick mixer
1. Before attaching the blending
attachment, ensure the attachment is
clean and dry not to damage the motor
unit by running water left inside after
cleaning.
2. Hold the blending attachment with
the blade down, and align the top end
of the blending attachment with the
corresponding end of the motor body.
Push until you hear a click, signalizing
correct lock of blending attachment.
3. Ensure the stick mixer is correctly and
fi rmly attached; it does not move or show
any deviation from the midline.
IN NO CASE WASH CHOPPER BOWL LID WITH GEAR, GEAR BOX AND MOTOR
UNIT IN WATER OR IN THE DISHWASHER. SEE THE CARE AND CLEANING
CHAPTER FOR CLEANING INSTRUCTIONS.