CASO Germany MyVac 20 - Manual (Page 51)

caso Vakuumierer MyVac 20 51
condition in the device as well as in the growth of fungus and
bacteria.
Attention
► Switch the vacuum system off prior to cleaning it and unplug
the plug from the wall power outlet.
► The sealing strip is hot after it is used. There is a danger of
burns! Wait until the device has cooled down.
► Clean the device after use as soon as it has cooled down.
Extended waiting unnecessarily complicates cleaning and
can make it impossible in extreme cases. Excessive
accumulations of dirt can even damage the device under
certain circumstances.
► Never immerse the unit into water or the dishwasher.
► If dampness penetrates into the device, this can damage the
electronic components. Please ensure that no liquid can
enter the interior of the device.
► Do not use any aggressive or abrasive cleaning agents or
solvents.
► Do not scrape off stubborn dirt with hard items.
► Dry thoroughly before using again.
16.2 Cleaning

External and Inner Cover Plate
• Take off the external and inner cover plates by a slight turn and
clean them by using a mild, non galling soap solution.

Boxes, Covers, Bottle Cap and Accessories
• Wash the accessories with warm rinse water and let it carefully
dry afterwards, before you use it again.
 Preservation bags
•
Washing the bagging material in warm water with a mild
dishwashing soap, then rinse the bags well and allow drying
thoroughly before reusing
.
Attention
► Bags used to store raw meats, fish or greasy foods can’t be
reused.