Salter Brecknell RD-65 Remote Display - Manual (Page 3)

1
RD65 Remote Display User’s Manual
Thank you for purchasing the RD series remote display. Please read all operating instructions
carefully before use and keep the following points in mind:
* Avoid using in condition of excess variation of line voltage.
* Do not operate near high-power electronic device. These devices emit RF and can cause unstable
readings.
* Ensure the communication data format, protocol, interface selection and setup is correct
before using.
1 Specification:
Model RD65
Communication
interface types
RS232
RS485
20mA current loop (active, self-powered, the host no need to supply
power)
20mA current loop (passive, the host need to supply power)
Data format 8N1, 7E1,7O1 selectable
Baud rate 150bps～19200bps selectable
Protocols 16 Selectable fixed Protocols
Display content Net /Gross , kg/lb indicators, weight data
Display Type 5”, 7-segment, 6 digits ultra-brightness LED display with
the capacity down to -99,999 and up to 999,999
Operation temperature -20℃ ～ 70℃
Power supply
1) 24VAC 2.0A,AC adaptor。
2) RD65 working current≤1.5A
3) Fuse 2A.
Waterproof grade IP65
Notes: Please b e kindly n oted t hat t he p ower u p v ersion t hat i s d isplayed after t he
count-down is 13.07.08.