Salter Brecknell RD-65 Remote Display - Manual (Page 16)

14
Fig.11
5 The meaning of some displayed symbols:
1) Err01：no communication
2) Err02：incorrect format data received.
3) Err03： over displaying range
4) ¯¯¯¯¯ ：over range
5)
______：below range
6 Trouble shooting
Problem Possible cause Check
No display 1）fuse damaged
2）adaptor damaged Replace fuse or adaptor
Display too dark 1） Low voltage
2） Inner part damaged Check the input voltage and
replace the damaged part or
main PCB
Err01
(no communication) 1) RD65 data format is different from the host
2) Communication cable is not connected
correctly. Check cable and the data
format setup
Err02
( in-correct format
data received) 1)Format switch is not set correctly.
2)Host is not set correctly.
3)unknown host or data format used on host
device Check whether the protocol
is matched between RD65
and Host.
Remote Display
Lock nut
expansion bolt
expansion bolt
Suspension arms