Salter Brecknell 7010SB - Manual

THE MODEL 7010SB ELECTRONIC SCALE
The model 7010SB electronic scale is a user friendly ten pound / 5000 gram
scale designed to to assist the operator
in calculating the mailing costs of letters
and parcels for selected USPS classes of mail.
UNPACKING YOUR SCALE
Carefully unpack and inspect the shipping container for evidence of shipping
damage. If such evidence is discovered, stop unpacking and immediately notify
the shipper to arrange to have the shipment inspected by an authorized
representative. All damages must be promptly filed with the shipper.
1. Open the box and carefully remove the scale from the shipping carton (save
the shipping carton for future use).
2. Place the scale on a flat level surface free from vibration.
3. Remove the AC adapter and the RS-232 interface cable from the packaging
material.
4. Before using your scale please plug the scale into a power outlet and turn on
the scale for 10 minutes. This will allow the scale to warm-up and ensure
accurate weighing.
INSTALLING THE BATTERY
Use 9V ALKALINE BATTERY ONLY
No other type provides a suitable power output. The manufacturer
recommends Duracell MN1604 or Ever-Ready Gold Seal 6LF22.
To fit the battery, remove the cover on the underside
of the scale and push the connector firmly onto the
battery terminals. Refit the cover.
PN# 7010SB-01 REV. A Page 1 of 7