Salter Brecknell 7620U - Manual (Page 10)

Model 7620U Bench Scale User’s Manual 10
Figure 1
7620 U Switch Location
Menu Mode
Gravity Mode
There are three modes available to you with
Switch 1 in the MENU Mode or OPEN position.
They are as follows:
1. DIAG Mode – To test areas of the scale’s
function
2. CONFIG Mode – To configure your scale for
your application
3. CAL Mode – To calibrate the scale
With Switch 2 in the GRAVITY Mode or OPEN
position, you may increase the “Local” gravity
value by pressing the ZERO key or decrease the
value by pressing the F1 key.
The structure for these menus is shown in
Figure 2. Specific information about each mode
and step-by-step instructions for accessing them
follow.