Salter Brecknell SBI100 - Manual (Page 29)

SBI 100 User Instructions Manual 27
6.1 Setup Controls
6.2 Parameters and Settings
Moves flashing digit Change flashed digits Saves data and move down to next
parameter setting
Exits setup mode
Config Menu Avail. Settings Default Definition Detailed Setting
P11 0,1,2 2 Units key configuration 0 = kg only
1= lb only
2 = units key active kg and lb
P12 0 - 7 7 Power on zero range
(full scale) 0 = +/- 1%
1 = +/- 2%
2 = +/- 5%
3 = +/- 10%
4 = +/- 20%
5 = +/- 50%
6 = +/- 100%
7 = no limitation
P13 00 - 15 3 Zero button range
(full scale) (00) = +/- 1% (06) = +/- 20% (12) = + 5%
(01)= +/- 2% (07) = +/-no limit (13) = + 10%
(02)= +/- 3% (08)= + 1% (14) = + 20%
(03)= +/- 4% (09) = + 2% (25) = + no limit
(04) =+/- 5% (10)= + 3%
(05)= +/- 10% (11) = + 4%
P14 0,1,2 0 Signal within power on zero
point range 0 = current weight
1 = calibration zero
2 = power off zero point
Hold
Print
Units Tare
On/Off
Zero
kg

kg