Salter Brecknell SBI100 - Manual (Page 25)

SBI 100 User Instructions Manual 23
5 Scale Calibration
The scale is configured from the factory to match the specified settings for each unit,
as defined by the product specifications and sales brochure. Modification of the
settings can be accomplished by altering user configuration settings P7-P10.
5.1 Setup Controls
5.2 User Configuration Settings
CAUTION!
Calibration and/or configuration of calibration settings of your scale should be
accomplished by a trained service technician using certified weights to ensure
proper operation and accuracy. Calibration is not covered under warranty.
Moves flashing digit Change flashed digits Saves data and move down to next
parameter setting
Exits setup mode
Hold
Print
Units Tare
On/Off
Zero
kg

kg
Config Menu Avail. Settings Definition Detailed Setting
P7 00-31 Displayed Resolution (00) = 500
(01)= 600
(02)= 750
(03)= 800
(04) =1000
(05)=1200
(06) =1500
(07) = 2000
(08) = 2400
(09) = 2500
(10)= 3000
(11) = 3500
(12)= 4000
(13) = 5000
(14) = 6000
(15) = 7000
(16) = 7500
(17) = 8000
(18) = 10,000
(19) = 12,000
(20) = 15,000
(21-31) = N/A
P8 0,1,2 Division Increment 0 = 1; 1 = 2; 2 = 5
P9 0-5 Decimal Position 0 = 123456; 1 = 12345.6; 2 = 1234.56;
3 = 123.456; 4 = 12.3456; 5 = 1.23456
P10 0,1 Calibration weight 0 = kg; 1 = lb