5 exit the setup menu, Exit the setup menu – Salter Brecknell PS2000 User Manual

Page 26

Text mode
Original mode

PS1000/2000 User Instructions

4.5 Exit the Setup Menu

Power off the indicator by pressing and holding the [ZERO/ON/OFF] key.

Move the slide switch on the rear cover back to the left and replace the metal
protective plate. Refer to section

4.2

for location.

Turn the indicator back on by pressing the [ON] key. The display will go
through a digit check, then settle into Normal Operating mode. All front panel
keys will now return to their normal mode of operation.

This manual is related to the following products:

PS1000