Salter Brecknell PC150 - Manual (Page 7)

PC-150 Operation Manual 7
User Menu Mode / Continued
USER MENU DESCRIPTIONS
NAME/CODE DESCRIPTION CODE/VALUE
A1
Baud Rate
Selects the baud rate for data transmission through the serial port. 1200 2400√ √√√
4800 9600
19200
A2
Data Bits and
Parity
Selects the number of data bits and parity of serial transmission.
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits
8n√ √√√
7O
7E
7n
A3
Mode of Serial
Transmission
Selects when data will be sent out of the serial port to a printer or
computer:
"C" = Continuous mode; send data continuously
"d" = Demand mode; send data when a PRINT command is issued
from the printer, computer, or scale.
C
d√ √√√
A4
Serial Data
Format
Selects the data format to be transmitted via the serial port to a
printer or computer.
"0" = Consolidated Controls Format
"1" = Toledo 8213 Format "2" = NCI 3825Format
"3" = Transcell Technology Format
“4” = Detecto ASD Format “5” = Triner Format
"6" = Fairbanks 70-2453-4 Format
0
1
2
3√ √√√
4
5
6
A5
Disable the
lb/kg Key
Allows the lb/kg key to be disabled so that an operator cannot acci-
dentally press the key and change the displayed units.
"0" = Disable the lb/kg key "1" = Enable the lb/kg key
0
1√ √√√
Setup Menu Mode
The PC-150 scale includes a Setup menu that determines the scale’s display mode, allows scale
calibration and also contains the scale's adjustable functional parameters. It consists of 5 sepa-
rate menu selections, each also with its own sub-menu of choices.
To change a listed parameter, you must first enter the Setup Menu mode. Once there, four of the
front panel keys become directional navigators to move around in the menus, and one key is used
to save or SET the selections.