AVer FD2000 User Manual

Page 33

System > General > Date & Time

In the “Date & Time” tab, the administrator can set and update the system’s date and time. After filling

in the correct settings, click Apply to apply the new settings.

Name

Function

(1) Synchronization Mode

Select the date & time settings method.

Manual – Manually set the date and time.

Sync with NTP Server – Obtain the date and time setting from

NTP server. Key in the NTP server name.

Sync from PC – Obtain the date and time setting on the current

(2) Date & Time manual

setting

When choosing “Manual” time setting, please set the date and

time here.

(3) NTP Server

When choosing “NTP” time setting, please set the date here.

Time Zone: To select the time zone where the unit is located.

NTP Server: To state the address of NTP server to synchronize

date and time with the unit when If “NTP” is selected in the

Synchronization Mode.

Time Adjustment Period: To select the interval to calibrate the

time of the unit.

Save &Test: To save and test NTP server settings

(4) Daylight saving

Check the ON/OFF box to enable or disable Daylight Saving to

enable and setup the start date and end date for daylight saving