AVer EXR5016_series quick guide - Manual (Page 22)

16
IV. Familiarizing the Buttons in Preview Mode
Name Function
(1) Exit Reboot: To restart the DVR system. It is required to enter the password
Power Off: To shut down the DVR system. It is required to enter the
password
Login: Using different ID to login to DVR system.
Cancel: To return to DVR application.
(2) Split Screen
Mode
Select from 6 different split screen types to view all the camera, or one
camera over the other or alongside on a single screen. It also allows you to
switch and view different camera number.
(3) Record Start/stop video recording.
(4) EMap Display the map in each area, and the location of camera/ sensor/ relay and
the warning.
(5) Network Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection. The default is
enabling.
(6) Setup Configure the system settings.
(7) PTZ Access PTZ control panel.
(8) Preview Switch to Preview mode. This allows you to view live camera display.
(9) Playback Switch to Playback mode. This allows you to view the recorded video file.
(10) Status bar Display the current date, time, hard disk free space, and system
temperature.
(11) Camera ID Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.
(12) Snapshot Capture and save the screen shot in *.jpg format.
(13) Event log Show the record of activities that take place in the system.