AVer EXR5016_series quick guide - Manual (Page 20)

14
III. Using DVR System
A. Way to Operate DVR
There are three ways can be managed the DVR unit:
1. Using mouse and keyboard
Connecting the mouse and keyboard through USB interface, user can easily to management the
DVR unit. For the first time using DVR unit, mouse and keyboard is the best way to set up all
DVR relevant configurations.
2. Using Remote Controller(Optional accessory)
After DVR unit has been setup, user can use remote control to preview, playback, backup, reset
alarm, output video and so on functions.
3. Using Front Panel button(For EH5216 + , EH5108 + , EH5216H + , EH5108H + , EH5216H,
EH5108H, EXR5008 + , and EXR5016 + )
It
’s an optional way to operate DVR unit. Front panel button function acts as same as remote
controller.
For the first time using DVR unit, using mouse and keyboard to setup all configurations.
B. First Time Using DVR Unit
1. Connect the mouse and keyboard to DVR unit(through USB interface)
2. Power on the DVR unit.
3. For security purpose, the DVR system would require you to enter User ID and Password before it
can be accessed. When the Authorization dialog box appears, enter the ID (superuser) and
Password (111111).
The superuser has full authority to configure and operate DVR system.
After login, the main GUI as following shown:
EH5216/EH5216H series Preview UI