AVer EXR5016_series quick guide - Manual (Page 12)

6
5. The hard disk plate can be installed 3 hard
disks. User can choose the position and place
the hard disk on it.
6. Turn the plate and hard disk over carefully
and screw the hard disk on the plate. If hard
disk cannot match to the screw hole, then,
you may adjust the hard disk position to
match the screw hole.
7. The look of three hard disks is installed on
hard disk plate.
8. Plug the SATA cable into SATA connector on
the PC board.
Some of DVR model may not have
DVD-ROM that depends on the DVR
user has purchased.
9. Plug the power cable into hard disk 10. Plug the SATA cable into hard disk
- User can leave un-plug the SATA cable
of the left side HDD for screwing plate
inside the DVR more easily later.
These 2 SATA
connectors are
for eSATA
connector and
DVD-ROM
drive