AVer EXR5016_series quick guide - Manual (Page 13)

7
11. Screw the plate within hard disk inside the
DVR unit
12. Plug the SATA cable into the left side hard
disk.
User can adjust the step 9, 10, and 11 for easily install process if necessary.
13. If user wants to install 4
th
HDD, then follow the steps to continue. Otherwise, go to the last two
steps to complete the installation.
14. Place the 4
th
hard disk on the HDD holder.
The head side of hard disk is same side of
the screw hole of HDD holder.
15. Screw (6 screws for both side) the hard
disk on the HDD holder.
HDD holder is an optional accessory.
User need to purchase from your dealer.
16. Plug the SATA cable into SATA connector on the PC board.