AVer EH1116H-4 Nano user manual - Manual (Page 46)

40
3.2 Camera Setup
The DVR system supports 8 cameras in combination of analog and IP cameras or only analog cameras. The
DVR system only supports first 4 channels (CH1 ~ 4) for IP camera.
3.2.1 To Setup IP Camera
Click Default will back to the factory default value.
i - EH1008H-4 Nano/Nano
+ only supports first 4 channels (CH1~4) for IP camera.
- EH1004H-4 Nano/Nano
+ supports both analog and IP camera in 4 channels.
- 1.3 MP with H.264/MPEG4/ MJPEG on the first 4 channels and 2.3MP with MJPEG on the 1st
channel for IP cam connection.
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as IP Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
When channel type is IP camera, the audio is not supported.
- Name
Change the camera name
- Description
Add a short comment
(5) IP Camera Information