AVer EH1116H-4 Nano user manual - Manual (Page 104)

98
6.2.2 Familiarizing the Buttons in PTZ Camera Controller
(1)
(10)
(2) (3) (4) (5)
(6)
(7)
(8) (9)
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Select the PTZ camera to operate.
(3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position
number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera. The direction buttons only support up,
down, right, and left direction.
(7) Camera ID pane Display the PTZ camera number that is being operated.
(8) Camera lens
speed controller
Adjust the moving speed of the PTZ camera lens.
(9) Camera preset
position number
Move the PTZ camera to the preset point.
(10) Group AutoPan Select to automatically operate PTZ camera in group.