AVer EH1116H-4 Nano user manual User Manual

Page 101

recording after the alarm has ended. The time range is 1~999 seconds. If user doesn

’t mark and set the

time, the alarm recording will continue recording until alarm is reset.

6. Click OK to accept the new settings and Cancel to exit without saving.

- Send to CMS (Central Management System)

Enable/disable the selected camera to send video to CMS

when the alarm is activated. Beside the Send to CMS

check box, click Detail. In the CMS Setting, select the

camera to enable/disable sending the video to CMS.

Enable All to select all cameras. Then, click OK to accept

the new settings and Cancel to exit without saving.