AVer EXR6004-Mini user manual - Manual (Page 32)

26
3.2 Camera Setup
Click Default will back to the factory default value.
3.2.1 To Setup the IP Camera
(1)
(2)
(3)
(4)
(5)
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as IP Camera.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Change the camera name
- Description
Add a short comment
(5) IP Camera Information: To connect the IP cameras.
- Use IP Camera Motion: Mark to enable the motion detected function if the IP camera has
supported. Once this function has enabled, the motion detection will based on the IP camera has
supported.