AVer EVC130 user manual - Manual (Page 79)

76
H.460 Gatekeeper with Firewall Traversal
Your EVC system is connecting to the internet through a firewall and your have a Gatekeeper outside
the firewall.
1. From the remote press “Home”-> “
” ->
“Setting”.
2. Press “
” -> “Network”.
3. Press “LAN Configuration (IPv4)”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP”.
5. Manually input the “IP address”, “Subnet Mask” and
“Default Gateway”.
6. Select “Apply” and press
(
Enter).
7. In the same page, go to “Gatekeeper” and press
(
Enter).