AVer EVC130 user manual - Manual (Page 18)

15
Aver Evc Wizard Setup
For the first time using AVer EVC system, the Installation Wizard will guide the user to setup EVC
system step by step. After completing the wizard setup, user may start to use the EVC system.
In Installation Wizard, user can use the following buttons on remote controller to move between the
selections and make/confirm selection.
: To expand the drop-down list, make/confirm the selection.
/ : Move the cursor up or down.
: Move the cursor to right or on Next button.
: Move the cursor to left or on Back button.
START
Please follow the below description to complete the wizard setup.
Connect your EVC system well and turn on the power.
After your EVC system starting, user will see the
Installation Wizard screen shown up.
LANGUAGE
Select the language of the EVC system.
Press to expand the drop-down list. Then,
use or button to move the selection and
press to make the selection. After selecting,
press to move to Next option and press
to go next step.