AVer EVC130 user manual - Manual (Page 21)

18
IPv6: IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4 for
some time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by colons.
Select and enter the following information and click Apply to save the settings. To go to next step,
click Next option and click Back to go back to Network Setting step.
1. Obtain Address is
(1) Static IP: Configure the system to use
the assigned IP address. Select this
when the public IP address is available.
(2) Auto: Obtain the dynamic IP address
automatically. User needs to enter the IP
address and prefix length in following.
2. Your IP Address is: Enter your IP address
manually.
3. Prefix Length: Prefix Length allows you to
place as many IPv6 devices as the underlying
network medium allows.
PRIVATE IP CONFIGURATION (BEHIND FIREWALL PORT FORWARDING):
Your EVC system is connecting to the internet through a firewall.
 Please make sure you have set the following ports in port forwarding in your firewall. Then, click
Next to select the IP mode of your network
Obtain IP address by DHCP: Configure the
system to automatically obtain an IP address from
the DHCP server. The EVC system will
automatically get a IP address which assigned by
your DHCP server on LAN. The IP address and
related information will display. Click OK to accept
the setting.