AVer TabCam user manual - Manual (Page 8)

4
ENGLISH
4B
Setting up and Operating TabCam
This section provides useful tips on how to adjust the TabCam to meet your needs.
Unfolding the TabCam
Follow the step by step procedure below to setup the unit.
(1) Unfold the arm. (2) Turn clockwise 90°. (3) Swivel up to extend
arm.
(4) Fold the camera head
down.
TabCam Deployment Criteria & Guidelines
Before deploying TabCam, please confirm the user environment meets the following
criteria.
Basic Deployment Criteria & Guidelines
 At least one tablet that can connect to a wireless access point (wireless router).
 A display device, e.g. TV or projector, with a method for outputting tablet content,
e.g. Lighting to VGA adapter, Lightning to HDMI adapter, Apple TV, etc.
 Access to a 2.4 GHz 802.11g/n wireless network. (The AVer TabCam solution does
NOT work in other wireless networks, e.g. 5 GHz and 802.11a networks)
 Check for sources of potential interference, e.g. microwave ovens, Bluetooth
devices, faulty satellite television cables, power lines, cordless telephones,
wireless speakers, flat-panel televisions, etc.
 Confirm the firmware for your TabCam wireless camera and the firmware for you
wireless access point are current.
 Confirm your TabCam app is current. To install and/or upgrade the TabCam app,
connect to the Apple App Store or Google Play and search “TabCam”.