Casio EX-Z750 - Manual (Page 66)

BASIC IMAGE RECORDING
66
Flash Unit Status
You can find out the current flash unit status by pressing
the shutter button half way and checking the monitor
screen and red operation lamp.
* Red operation lamp
It means this:
Flash unit is charging
Flash unit is ready to fire
When the red operation
lamp is this:
Flashing
Lit
Red operation lamp *
The indicator is also shown
on the monitor screen when the
flash unit is ready to fire.
Changing the Flash Intensity Setting
Perform the following steps to change the flash intensity
setting.
1. In a REC mode, press [MENU].
2. Use [ ̇] and [̈] to select the “Quality” tab.
3. Use [
̆] and [̄] to select “Flash Intensity”,
and then press [
̈].
4. Use [
̆] and [̄] to select the setting you
want, and then press [SET].
IMPORTANT!
• Flash intensity may not change if the subject is too
far or too close to the camera.
To make flash intensity:
Stronger
Normal
Weaker
Select this setting:
+2
+1
0
–1
–2