Arc Machines 205 WDR User Manual
Page 48
M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
44
44
44
44
Always keep the protective boots and dust caps on all connectors and fittings until cables
are ready to be installed. A major cause of downtime in any automatic welding system is
improper care and use of cables.
Take extreme care to avoid dropping the power supply or the weldheads.
Always disconnect the power input cable from the junction box or wall-plug
before cleaning.
DO NOT USE acid, corrosives or any liquid substance on the Model 205 or any AMI
weldhead. When cleaning use only a light solution of isopropyl alcohol on a soft cloth.
DO NOT ADD lubrication such as graphite, oil, or grease to the weldhead or power
supply unless it is specified in the operation manual for that equipment.