Arc Machines 205 WDR - Manual (Page 37)

M O D E L 2 0 5
O P E R A T O R ’ S M A N U A L
33 33 33 33
4.8 CREATE A WELD SCHEDULE
The Model 205 provides two versions of manual weld schedule creation: Manual Multi level
and Manual S
3
(Single Level Sloped) and four versions of Automatic weld schedule
generation: Auto Continuous Travel, Auto Stepped Travel, Auto Tack, and Auto S
3
.
1. From the HOME screen press CREATE NEW.
2. Enter the Weld Schedule NAME.
3. Enter the DIAMETER, WALL and, MATERIAL.
4. Press the WELDHEAD MODEL field and select the weldhead that you will be using.
Note
Use the ENTER key (on the displayed 10-key pad) or the RETURN key (on the
displayed keyboard) to SAVE each entry before making an entry into the next field.
Note
The Name, Diameter, Wall and Material will be displayed in the Library. The Diameter,
Wall, and Weldhead Model will be used for establishing welding parameters for
Automatic Weld Schedule generation.
5. Toggle the INCH key to select inches or millimeters to represent the size of the tube to
be welded.