Arc Machines 415 WDR - Manual (Page 29)

Model 415
Operation Manual
Document No. 740084
Revision N
24
11. TVL MODE - Allows operator to change Travel Direction or turn Travel OFF.
12. WIRE ON/OFF - Allows operator to turn Wire Feed On or OFF.
13. SEQ START - Used to Start Weld Sequence.
14. MAN ADV - Used to advance the Sequence from one level to the next level.
15. STEERING - Thumb Wheel is used to steer or set the Torch Oscillator Position.
16.
SEQ STOP - Used to Stop the Weld Sequence and engage Downslope
17. ALL STOP - Used in welding emergency to stop the weld sequence and engage
Postpurge.
18. ARROW UP/DOWN - Used for changing values during overrides.
19. AMPS - Used for overriding Current.
20. AVC - Used for overriding AVC setting.
21. EXC - Used to override Osc Excursion time and/or Osc Amplitude
22. DWL - Used to override Osc IN and/or OUT Dwell time.
23. TVL - Used to override Travel Speed.
24. WIRE - Used to override Wire Feed Speed.
25. AVC RESP - Used to change AVC Response Setting.
26. PLS TIME - Used to override Pulse Times.
27. TVL CW JOG - Used to jog the Travel in the CW direction
28. TVL CCW JOG - Used to jog the Travel in the CCW direction
29. WIRE FEED JOG - Used to manually FEED wire.
30. WIRE RETR JOG - Used to manually RETRACT wire.
31. AVC UP JOG - Used to move the Torch (AVC) UP.
32. AVC DOWN JOG - Used to move the Torch (AVC) DOWN.
33. EMERGENCY STOP - Electronically turns the main breaker on the M-415 OFF.
4.6
OTHER SYSTEM FEATURES
1. PRINTING - The M-415 can be connected to any Windows 95 compatible parallel port
printer and hard copies of all weld schedules can be made. An auto print feature can be set
up to allow the system to automatically print a copy of the Weld Parameters used
(including overrides) after each sequence.
2. MEMORY MEDIUMS - The M-415 has a Built-in 1 GB (or greater) hard drive.
3. DATA BACK UP - All information contained in the system hard drive can be backed up
through a variety of methods.
4. PASSWORD/SECURITY lockouts - If desired various degrees of security can be set up to
control who can change what.
5. CALCULATE FUNCTIONS - System can auto create Fusion weld schedules and also
provides a weld calculator to help with the common math functions associated with
weld schedule development.
6. SOFTWARE UPGRADES are done via Floppy or PC Option download via USB.
7. METRIC/ENGLISH CONVERSIONS - Most functions that have units of measure can
be set to be programmable in both English or Metric units.
8. LANGUAGES - The user can set up different language files and translate any or all
English text to their language or languages of choice.
9. PROJECT DATA - As standard the M-415 can collect information about a weld including
the following:
1. Weld Identification Number
2. Welder/Operator Identification name or number
3. Date, and time of weld pass
4. Date and time of print out.
5. Weld Head Model and serial number used.
6. Power Supply Serial number
This information can be printed along with the weld parameter after a Weld Sequence.
10. FUNCTION DATA ACQUISITION - As standard the M-415 provides the following Weld
Data Collection and/or outputs.