Alumax WC 66 - Manual (Page 19)

10
INSTRUCTION MANUAL
19
Place door receiver (15) against the wall, so
e h t o t n i y l h t o o m s s e d il s l e n a p r o o d e h t t a h t
receiver. Mark hole location.
Remove door receiver and drill in marked
location with 1/8” drill bit.
Insert one drop of silicone into hole.
Reposition and secure in place with
provided screw then place the screw cap.
13 DOOR RECEIVER INTALLATION
15
THRESHOLD
14
Place threshold (10) between wall and
bottom guide as shown in
14a. Cut off
any excess length.
Apply silicon on the bottom of threshold as
indicated in 14b. Secure threshold in place.
13a
14a
13a
13b
14b
13b
13c
13c
13d
13d
INTERIOR
SHOWER SIDE
CUT ONLY IF NECESSARY
14a
14b