Alumax WC 66 - Manual (Page 17)

11d
INSTRUCTION MANUAL
17
11
DOOR GASKETS INSTALLATION
Temporarily install midgasket
(5) and the door gasket (8) to
door panel.
Close door entirely, mark
interference of the gaskets
with the running rail.
Cut gasket at marked
locations using cutters. Note
that midgasket (5) needs only
to be cut below the running
rail. The top part is no longer
required for assembly.
Reinstall gaskets from
bottom working your way up.
Use a mallet to insure that
the gaskets are fully pushed
onto glass panel door.
11a
11b
11c
11d
REMOVE GASKET FROM
PANEL BEFORE CUTTING.
5 8
5
5
8
8
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
11a
11b
11c