Alumax WC 66 - Manual (Page 11)

INSTRUCTION MANUAL
11
Replace the wall jamb against wall using
centerline previously marked as a guide.
Be sure to center the slotted holes with the
centerline. Level and mark locations of the
four holes to be drilled. Remove the wall jamb.
Drill a hole in each location with a 1/4” drill bit.
I nsert one drop of silicone in each hole in the
wall before inserting the supplied wall plugs(x4).
WALL JAMB INSTALATION (CONTINUED)
1
20
4
4c
4d
4e
4c
4d 4e
CERAMIC TILE
INSTALLATION
USE A DRILL BIT FOR
CERAMIC TILES.