Alumax W2 CRP - Manual (Page 17)

5 6
5
5
6
6
12a
12b
12c
12d
REMOVE GASKET FROM
PANEL BEFORE CUTTING.
INTERIOR
SHOWER SIDE
INTERIOR
SHOWER SIDE
INSTRUCTION MANUAL
17
6
Temporarily install midgasket (5) and the door
gasket (6) to door panel.
Close door entirely, mark interference of
gaskets with running rail.
Cut gasket at marked locations with cutters.
Note that midgasket (5) needs only to be cut
below running rail. The top part is no longer
required for assembly.
Reinstall gaskets from bottom working your
way up. Use a mallet to insure that the
gaskets are fully pushed onto glass
panel door.
12a
12b
12c
12d
12 DOOR GASKETS