Alumax W2 CRP - Manual (Page 12)

6a
6b
INSTRUCTION MANUAL
12
5 WALL BRACKET BACK PLATE
Align back plate of wall bracket to previously traced
mark on wall. Trace hole centers to determine
drilling location. (x2)
Drill marked holes in walls by using the 1/4” drill bit.
Insert one drop of silicone in each hole bored in the
wall before inserting the wall plugs.
Screw in head screws through holes to secure
back plate of bracket to wall (x2)
5a
5a
5b
5b
5c
5c
5d
5d
INTERIOR
SHOWER SIDE
6 U-CHANNEL
Apply double sided VHB h t o b f o m o tt o b o t e p a t
U-channels.
Align U-channel with previously marked lines
and press them down to secure to the base.
CLEAN BOTTOM OF U-CHANNEL AND BASE
BEFORE APPLYING DOUBLE SIDED VHB
TAPE TO UNDERSIDE OF U-CHANNEL.
6a
6b
5d