Continued – Alumax P-DRA1Y User Manual

Page 10

background image

10

Ensure that the running rail (1) is at the

highest possible position in reference to the

holes of the fixed panel (7). Adjust the fixed

panel (7), by way of the running rail (1), so

as to force the gasket (10) against the wall.

The distance between the fixed panel and

wall should therefore be 3/16”.

Mark the bottom glass clip (11) and

bottom guide (12) locations on the base.

Mark the locations for the wall brackets (2)

on the walls on both sides of shower.

Ensure that their horizontal positioning is

as illustrated.

1

4B

CONTINUED

ENSURE THAT THE FIXED

PANEL AS WELL AS THE

RUNNING RAIL ARE LEVEL

DURING THESE PROCEDURES.

VERTICAL ALIGNMENT

OF PANEL

5/16”

(8mm)

CENTER OF BASE THRESHOLD

1

7

7

10

3/16’’

2

12

11

WASHER

GLASS

HOLE

1

4