How to charge the battery – Canon SCOOPIC 16 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

An exclusive type 12 v nickel cadmium recharge

able battery is used in the Scoopic 16 as the
pow/er source for film drive and electric eye. The

camera functions only when this charged battery

is properly loaded. A fully charged battery will
provide power for driving eight reels of 100-foot

(30.5-meter) length film at 24 frames per second.

#Since this battery is not charged when you

purchase it, be sure to charge the battery before
loading it into the camera.

Canon Scoopic Battery Charger-S

The exclusive Battery Charger-S is used for charg

ing the nickel cadmium battery. Each battery

can be charged simultaneously either in a pair or
singly.

Set the voltage switch according to the voltage

to be used. For example, in a locale where

the household voltage is 220 v, set the voltage
switch at 200-240 v.

#Be very careful not to make a mistake on the

voltage setting.

Insert the battery after matching the + and

— markings on the battery with those on the

charger.

How to Charge the Battery