Canon Model 7 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
20
^■Then
turn
the
magazine
opening
key
clockwise
to
“close,”
and
return
the
knob
to
its
former position. Do not turn the magazine opening key before closing the back cover.
8.
Wind
the
iever
and
press
the
shutter
button
with
the
iens
cap
on.
By
doing
this
twice you wiii have cleared the two frames exposed to the light whiie you were ioad-
ing.
.
.
and
the
exposure
counter
dial
will
advance
to
“0”
from
“
S.”
Wind
the
iever again and you are ready for the first shot.
• The fiim
is properly loaded and
transported if the rewind crank lever rotates when
the
film
wind lever is wound. If
the rewind crank lever does not rotate, it means
the
film was not loaded properly. If such is the case, take out the film--as illust
rated on pages 22-23--and reload the film.
• After you have finished loading the film, be sure to
set the speed of film used on
the
film
speed indicator window.
Refer to page 15 for setting the film speed.