Canon 577 G - Manual (Page 17)

SETTING THE APERTURE
ON THE CAMERA
New F-1 (Shutter-Priority Mode),
A-1, AE-1 PROGRAM, and AE-1
•FD Lens: Leave the lens on “A”.
The aperture you have set on the
flash will be set on the camera
automatically when the 577G’s
pilot lamp glows. The settings of
the A-Ts AE mode selector and
AT dial do not matter (except in
relation to shutter speed, p. 12). [If
you wish, you may remove the
aperture ring from “A” and turn it
to the auto aperture you have set
on the flash or to a different
aperture to make an exposure cor­
rection. In this case, remember to
reset the aperture each time you
reset the selection switch on the
577G.]
• FL Lens: See “Other Cameras”,
next column.
New F-1 (Manual, Aperture-Priority
Modes) and Other Cameras
Turn the aperture ring to the same
aperture you have set with the selec­
tion switch on the flash or to a dif­
ferent aperture if you wish to correct
exposure.
15