Canon 577 G User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Unhook the Transistor Pack G’s

cord from its case and remove the

pack from the case.

2. Turn off the transistor pack’s

power switch (Photo 1).

Insert

the

set

six

kaline-manganese batteries into
battery magazine TP as illustrat

ed. Then align the contact on the

magazine

with

the

transistor

pack’s and insert the one into the

other (Photo 2).

Insert a fully-charged Ni-Cd Pack

TP into Transistor Pack G the

same way as battery magazine TP

is inserted.

4. Reinsert the transistor pack into

its case as shown in the photo.

Then rehook the cord (Photo 3).

5. Align the index on the plug at the

end of the transistor pack’s cord

with the index on the 577G’s ex
ternal power source socket. Push
the plug securely into the socket

(Photo 4).

6. Turn on the transistor pack’s

power switch. The lamp next to

the power switch should light up

(Photo 5).

7. Make sure the usual preparations

as described in the following

pages

have

been made

camera, flash and lens and wait

for the 577G’s pilot lamp to glow.

Then take the picture (Photo 6).

The transistor pack’s operation

lamp glows as long as the power

switch is on and there is power.

However, even when it is glowing,

the batteries should be replaced
with new ones or the Ni-Cd Pack
TP should be recharged if the

flash unit’s recycling time be

comes longer than usual.

* When the batteries wear out, re

place all of them at the same time

with a set of new ones which are
all of the same brand.

* If you do not expect to use Tran

sistor Pack G for a long time, re

move

the

alkaline-manganese

batteries from the magazine. Ni-
Cd Pack TP may be left inserted

but the power switch must be off

prevent

corrosive

battery

ieakage and other potential dam
age.

Be sure the transistor pack’s

power switch is off whenever it is
not in use.

* Should the battery temperature

rise in continuous shooting with C-

size batteries, you may rest at
ease, for it is a normal condition.

* There is a protective lining be

tween Battery Magazine TP and

Transistor Pack G.

Before using, remove this lining.
It may be thrown away.