Canon 166 A User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
"M”
signal
to
indicate
manual
aperture
control The meter needle will swing to its
upper limit
AL-1 and AV-1
The meter needle will swing to the shutter
speed of 1/60 sec. (unless selector dial is
on "B")
AT-1
There is no viewfinder indication in the AT-1
New F-1
Shutter speed indicator shows the setting
on the shutter speed dial, but the shutter
speed is automatically changed to X-sync,
of 1/90 sec. The meter needle will swing
to
its
upper
limit
The
aperture
needle
points to the aperture set on the lens.
In Aperture
Priority
AE Mode the meter
needle points to the right of the 1/60 sec