Test firing, Confirming exposure and shooting – Canon 166 A User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Test Firing
To test the flash for proper function, press
the pilot lamp after it glows If the flash
fires, it is in proper working order
Confirming Exposure and
Shooting
14
After
focusing,
check
the
lens'
distance
scale to make sure the shooting distance
is within the auto distance range indicated
by the red or green line on the flash If it is
not, either move closer to or farther away
from the subject as required, or set the Ap-
erture/MANU
selection
switch
to
a
more
appropriate position
After the pilot lamp lights up, press the
shutter
button
halfway
and
confirm
ex