Checking the exposyre – Canon EOS 1000 F User Manual

Page 55

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking the Exposyre

• If the minimum aperture value of the

lens in use blinks, clear the focus points

by turning the command dial to another

position and returning it to DEP. Move

back from the subject or sv\/itch to a

wide-angle lens or zoom lens’ wide-

angle setting and repeat steps #2

through 4. When the aperture value

stops blinking, the distance range will be

sharply focused and correct exposure

will be obtained.

• If both the shutter speed and the aper

ture value blink, the exposure is not cor

rect. Use an ND filter in bright

situations. The flash can not be com
bined with this mode.