N. loading and unloading your camera – Canon III-A User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
n. LOADING AND UNLOADING
YOUR CAMERA
LOADING
you begin
Always load in subdued light. Before
loading,
set
the
Reversing
Lever
to
"
A " (Advance) and turn the Film Winding Knob
until
it
stops.
Press
the
Shutter
Release
Button.
Keep the Lens Cap in place.
Open the Baseplate by lifting the lock handle and
turn it in the direction shown by the arrow, from
" Close " to " Open."
Pull out the Take-up Spool, and slide the ready cut
leader end up under the Take-up Spool Clip os far
as it will go. The glossy side of the film should
face the spool. Make sure that the perforated edge
of the film is flush with flange of the Take-up Spool.
Do not wind the film around the spool.
21