Canon ZOOM 8-3 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTENTS
Page
Canon Reflex Zoom 8-3 Specifications •••6
Loading the film.......................................... 8
Changing the film...................................... 11
Exposure Adjustment................................ 12
Viewing, Zooming and Focusing ............ 16
1. Viewing .......................................... 1 6
2. Zooming........................................1 6
3. Focusing.......................................1 8
Corrected Vision ........................................ 1 9
Holding the Camera................................... 20
Taking pictures ......................................... 21
Panning ........................................ 24
For the best results from your Canon
Reflex Zoom 8-3 ........................................ 25
Filter Guide................................................. 26
How to Load Mercury Battery
Load a mercury battery first before using your Canon Zoom 8-3
Unless you do this, meter does not work.
1.
Unscrew the battery cover above the viewfinder by turning it
counter-clockwise.
2.
Insert a battery with plus (-h) side facing out and minus (—)
side facing meter cantact.
3. Screw the battery cover turning it clockwise.
For CdS light meter, the following mercury batteries are available
on the market.
RM-1 by Mallory (U.S.A.)
M-P by National (Japan)
E-1 by Eveready (U.S.A.)
RG-1 by General (U.S.A.)
Any mercury battery has life of about one year under normal usage.
*
When loading a mercury battery, clean the both poles of the
battery with dry cloth and avoid fingerprints and sweat.
*
Make sure positive (-F) and negative (—) sides of battery.
* If the needle does not move, it is time for a change.
* Remove the battery from the camera if the camera is not to be
used for any length of time, and choose dry place for storing.