Manual flash photography – Canon 188A User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Flash Photography
Setting
the
Aperture/MANU
selection
switch to the lowest position places the
188A in the manual flash mode The auto
matic flash circuit is cut off. and both flash
and camera are switched to regular syn
chronized flash photography In this mode,
the shutter speed of each A-series camera
and F-1 are still switched automatically to
the X-synchronization speed (unless the
shutter speed is set on "B") when the pilot
lamp glows. The aperture, however, must
be calculated for each change in shooting