Canon 188A User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[Error in Display]
The aperture displayed may be one-half f/
stop off the one selected on the flash. This
is because the aperture display is in one-
half f/stop increments; it has no effect on
actual exposure The aperture display may
also flash on and off if the flash-selected
aperture is the same as the lens’ maximum
aperture. In this case, exposure will be cor
rect, but it is advisable to check the flash-
selected aperture to make sure it is not
larger than the lens' maximum aperture.
AE-1 PROGRAM Display
Full Autoflash Mode: FD lens on '
shutter speed selector dial not on
e
The aperture selected on the
flash and the "[f]'* mark in-
d(eating the flash (s charged
will be displayed^ After the
shutter is released, the "[£"
mark will flesh on and off for
two seconds provided you
continue to press the shutter
A" and
"B."
m