Canon 188A User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Test Firing
To test the flash for proper function, press
the pilot lamp after it glows If a flash is
fired, the flash is In proper working order
Confirming Exposure and Shooting
After focusing, check the lens' distance
scale to make sure the shooting dis
tance is within the auto distance range
indicated by the red or green line on the
flash If it is not. either move closer to or
farther away from the subject as required,
or set the Aperture/MANU selection
switch to a more appropriate position
After the pilot lamp lights up. press the
shutter button halfway and confirm expo
sure information in the viewfinder The
indication varies depending on the camera
(See pp 18-21) If everything is correct,
confirm focusing and press the shutter
button all the way for shutter release